• Sales Department1:0371-67842763
  • Mobile:+86-18790291588(Rong)
  • Sales Department2:
  • Mobile:+86-13838210811(Zhang)
  • International Trade Department:+86-13526688881
  • Fax:+86-371-67842730
  • Add.: Xigang industrial park, Zhengshang Road, Zhengzhou city
Product Display
    silicon carbide ultrafine grinding mill
  •      This new type silicon carbide ultrafine grinding mill adopts high strong hydraulic device, two-grade converter technique and steel two-grade grinding chamber. There are no screw bolts and bearings in inner of main machine. Production capacity of this grinding mill is 3 times of other grinding mills. Fineness of its products can reach 5000 meshes. It is a newest type grinding mill with low maintain cost.

     

     

    Silicon carbide ultrafine ultrafine grinding mill is mainly used to grind high hardness materials which are under 10 grades. Fineness of its products can reach 500-5000 meshes (25um-2.6um); for special materials; can reach 8000 meshes (1.6um). It solves production capacity problem and fineness problem of traditional grinding mill.

      Working principle of silicon carbide ultrafine grinding mill:

    SX-88A type 1010A type silicon carbide ultrafine grinding mill process flow diagram

    SX-88B type 1010B type silicon carbide ultrafine grinding mill process flow diagram

     

     
      Features of silicon carbide ultrafine grinding mill:
    1. This machine takes advanced assembling technology. There is no bolt and axletree in grinding chamber, we has solved axletree and bolt flexible leading to the equipment damage’s problems
    2. This machine adopts vertical double stage double room alloy steel ball grinding device, and the active grinding plate driven the steel ball rotation to grind materials, solve replace frequently vulnerable parts about the dust flies in grinding machine, grinding roller, grinding ring, and axletree’s problem
    3. This machine adopts the high strength hydraulic device; increase the working pressure 6-20tons of using alloy steel ball grinding plate, thus adding the material of force grinding speed
    4. This machine has two-stage grinding chamber, fine degree is higher, high output, solve the problem of traditional single stage and low fineness and low yield
    5. This machine uses double frequency converse technology, multilevel discharge; accurate classify is up to 99%, solve the problem of unclear classification
    6. To improve anti-friction, high quality steel ball and the paragon steel grinding disc has been used to this machine
    7. This machine’s transmission takes vertical moderator, vertical drive axle, the grinding disc is working under vertical axles’ moving, and there is no bolt and axletree from the vertical axle to grinding disc, smoothly working. Solve the conventional grinding mill’s problems of exchanging for axletree, bearing bush, and axle sleeve
    8. This machine takes negative pressure working to solve dusts going out under positive pressure of traditional grinding mill’s fan
    9. This machine takes the transmission classify, cyclone feeder, four stages cyclone feeder to make grading and semicolon
    10. Double cabinet sound insulation device has been assembled to this machine’s shell, and mute and the air filter device has been used to the fan. They are used to decrease noise, pulse filter and air filter device get rid of the dust, there is no dust, no noise, furthermore, environment-friendly
    11. This machine takes low rotate speed, negative pressure cooling system to keep cooling and the character of material while grinding ,at the same time solves the traditional ultrafine powder grinding and pulverizer could not keep the original nature
    12. There is no axletree, avoiding polluting material by oil spilling
    13. This machine is widely applicable to height, medium, low etc. all kinds of material Moh’s hardness class under 10
    14. Product fineness of this machine is higher, finished fineness could be adjusted 500-5000mesh, to special material could be 8000 meshes
      Technical data of silicon carbide ultrafine grinding mill:
    No.
    88A
    88B
    88C
    1010A
    1010B
    Motor of main machine
    30 KW-6 grades
    30 KW-6 grades
    18.5KW-6 grades
    45KW-6 grades
    45KW-6 grades
    Motor of No. 1 classifier
    7.5KW-2 grades
    7.5KW-2 grades
    /
    11KW-2 grades
    11KW-2 grades
    Motor of No. 2 classifier
    11KW-2 grades
    /
    /
    15KW-2 grades
    /
    Adjustable motor
    /
    /
    4KW
    /
    /
    Motor of fan
    22KW-2 grades
    22KW-2 grades
    18.5KW-2 grades
    30KW-2 grades
    30KW-2 grades
    Motor of electric feeder
    0.06
    0.06
    0.06
    0.06
    0.06
    Motor of bucket elevator
    3KW-4 grades
    3KW-4 grades
    3KW-4 grades
    3KW-4 grades
    3KW-4 grades
    Hydraulic pressure
    6-20 T
    6-20 T
    6-20 T
    6-20 T
    6-20 T
    Production capacity
    100-2500 kg/h
    100-2500 kg/h
    100-2000 kg/h
    200-3500 kg/h
    200-3500 kg/h
    Size of feeding materials
    <5mm
    <5mm
    <5mm
    <5mm
    <5mm
    Fineness of product
    μm
    150-2.6
    150-5.5
    150-6.5
    150-2.6
    150-5.5
    mesh
    100-5000
    100-3000
    100-2000
    100-5000
    100-3000
    Hardness of raw material
    (Moh’s hardness, grade)
    1-10
    1-10
    1-10
    1-10
    1-10
    Total power
    73.56KW
    62.56KW
    44.06KW
    104.06KW
    89.06KW
    Dimensions
    (L*D*H, m)
    17.5*3.2*5.5
    15*3*5.5
     
    17.5*3.2*5.5
    15*3*5.5